
Tolsen 230x100mm Foam Plastering Trowel (10mm EVA Base) 41019
Sold By:sealantsandtoolsdirect.co.uk
Tolsen
Tolsen 230x100mm Foam Plastering Trowel (10mm EVA Base) 41019
Sold By:sealantsandtoolsdirect.co.uk
Tolsen
Tolsen 230x100mm Foam Plastering Trowel (10mm EVA Base) 41019MPN: 41019Barcode: 6933528741107Size: 230 x 100 x 10mmWeight: 0.15kgOverview:The Tolsen 230x100mm Foam Plastering Trowel (10mm EVA Base) 41019 works plaster, mortar and concrete for smoothing, finishing and texturing. Designed with an EVA foam contact face, it lets you work the applied material by hand across the area you are finishing. You can bring adjoining passes together rather than leaving each part of the surface as a separate worked strip. When smoothing a coat, use the base to address raised areas and continue through the section you are treating. For texture work, the face is the part you move against the surface to create the treatment the job needs. The working base measures 230mm long by 100mm wide, with a 10mm thickness. You decide where to begin each pass and where to stop before moving to the next section.You get a masonry and rendering hand tool allowing you to work on the exposed face of an applied coat, moving through the part of the surface that still needs attention. Working one section at a time lets you inspect the surface you have just treated before continuing into the area alongside it. You use the EVA foam face for surface treatment, bringing it onto the work and lifting it away between passes. For a smooth treatment, concentrate on the shape of the face you are leaving behind. If the job requires texture, work towards that surface treatment rather than continuing to flatten the area. At the boundary of each section, you can address the join between the part already treated and the material you will work next.What You Can Work with the EVA FaceThis format covers the surface-treatment tasks below using the foam base as the contact face. Plaster surfaces that need hand finishing Mortar faces ready for surface treatment Concrete areas requiring smoothing work Texturing an applied coat by handChoose it for work where you want to guide the contact face directly across the material.Applications: Plastered Room Surfaces: Treat newly coated wall areas during interior finishing work.; Mortar Surface Treatment: Work the exposed face of an applied mix.; Fresh Concrete Areas: Address accessible surface sections before the material sets.; Patch Finishing Jobs: Bring a repaired area into the surrounding surface treatment.; Overhead Coated Areas: Work reachable ceiling sections during plaster finishing.How to Use: Hold the tool ready to work the selected section.; Bring the EVA face into contact with the material.; Guide it through the area that needs smoothing.; Work the section's boundary into the adjoining material.; Remove the base from the surface.; Inspect the worked area before continuing.







