
Optimate 4 12V Battery Optimiser / Charger Description: Recommended by virtually every major motorcycle manufacturer! OptiMate 4, the new 6-stage battery optimiser specifically designed for modern 12V starter batteries from 2.5 to 50 AH capacity. Ideal for motorcycles, ATVs, jet-skis etc. The latest OptiMate 4 takes the proven OptiMate interactive charging programme even further – features include: Automatic Self-Diagnostic Test: Immediately on connection, the microprocessor checks the circuit and flashes all LEDs to confirm correct operation. Dual-Stage Recovery Action: If the diagnostic check determines the battery is sulphated (deep-discharged) the first recovery stage attempts to drive in an initial current by applying up to 16V for a brief limited period. If this is unsuccessful, the TURBO recovery stage engages (indicated by a flashing recovery LED), which increases the applied voltage to up to 22V. This action is limited to a maximum of two hours. Charge Current Display: Central LED column display shows delivered current. This, together with the charge status information provides the user with a detailed insight regarding the state of charge and the state of health of the battery. High Power: OptiMate 4 has a maximum output current of 0.8A. High Efficiency: Despite delivering 33% more power than the OptiMate 3, OptiMate 4 consumes less electricity. Microprocessor Control: Provides enhanced operation. Improved Connectors: All weatherproof connectors now feature "glide-guide" inserts for easier connection. Enhanced Battery Testing: 'Traffic-Light' LEDs indicate results of the end-of-programme test for power drain (whether in the battery or due to a problem in the bike´s electrical system). IP64 Weatherproof Enclosure Supplied complete with two connection leads - one with croc-clips (TM-74) plus a fused connection lead with eyelet terminals (TM-71). Specification: Input: 220 - 240V AC Output Voltage: 12V DC Max Output Current: 0.8A In Detail: Maximum output current increased to 0,8A without increasing energy consumption 48 hour time limit on stages up to the first of the cyclic tests for battery drain to avoid wasting time and energy on batteries with a shorted-out cell 19 possible LED indications displayed on 10 LEDs on the stunning new control panel 5 possible results of the cyclic hourly tests for power drain /retention are displayed on a combination of green, yellow & red TEST LEDs IP64 weatherproof sealed housing with built-in mounting lugs (replaceable if damaged for example by over-tightening a fixing screw) New cable bushings avoid insulation stress in ultra-cold temperatures New "glide-guide" connector pin inserts avoid "sticky" connections









