
Sika Black Jack 904 25 Litre - Roof Felt and Chippings Adhesive Drum 852653 - 90425
Sold By:sealantsandtoolsdirect.co.uk
Sika
Sika Black Jack 904 25 Litre - Roof Felt and Chippings Adhesive Drum 852653 - 90425
Sold By:sealantsandtoolsdirect.co.uk
Sika
Sika Black Jack 904 Roof Felt & Chippings Adhesive 25 Litre Trade Drum 852653Trade Size – Trade Price – Money Saver DealFormerly Everbuild 904 – Now Sika BrandedSold in Single 25 Litre Trade DrumsREF: 90425 | MPN: 852653 | Barcode: 5029347009434Size: 25 LitresColour: BlackOverviewSika Black Jack 904 Roof Felt Adhesive in the 25 litre trade drum is the largest pack in the range and is aimed at roofing contractors, property maintenance teams and larger felt-laying jobs. It is a cold-applied oxidised bitumen adhesive used to bond roofing felt to timber, concrete, prepared metal and existing felt. The same product is also used for sealing felt laps and edges, so a single drum can cover the main bonding work as well as the detailing needed across a larger roof.25 Litre Trade Pack – Built for Larger Roof AreasThis is the pack size to look at when several smaller tins would slow the job down. At Sika's published application rate, a 25 litre drum gives a theoretical 32.5–40m² of felt-bonding coverage. Actual usage will depend on the roof surface, the amount used at laps and edges, and how porous or uneven the background is. For cold gritting, the same drum gives approximately 35m² coverage with 3mm chippings or around 27.5m² with 10mm chippings. These figures make the trade drum easier to plan into larger roofing jobs where material quantities matter.For trade users, the main benefit of the 25 litre size is having enough material on site to keep a larger job moving without repeatedly changing tins. It can also be used as a cold-gritting adhesive for fixing mineral chippings to the final felt layer. Sika describes the cured film as tough but flexible, allowing it to respond to normal temperature changes across the roof.Trade Lap DetailsFor larger felt-laying jobs, correct lap dimensions matter. Sika specifies at least 75mm for side laps and 150mm for roll-end laps. Coat the underside of the overlap generously with Black Jack 904 and compact the joint thoroughly.Using the 25 Litre Drum for Cold GrittingBlack Jack 904 can be used as a cold-gritting solution on roofs with a slope of up to 10°. Work in manageable areas rather than coating too far ahead. Spread the adhesive evenly and place the chippings into the film immediately while it is still wet. The chippings should cover the adhesive completely without excessive build-up. Leave the finished surface for at least 72 hours, then lightly brush away loose excess material. No exposed black adhesive should remain.Applications: Large flat roofing jobs:: Suitable where substantial areas of felt need bonding from one container.; Commercial and maintenance work:: Useful for contractors carrying out repeat roof repairs or working across several sections of the same property.; Timber roof decks:: Bonds second and subsequent felt layers once the first layer has been mechanically fixed.; Concrete roofing surfaces:: Can bond felt to correctly primed concrete and cement-based backgrounds.; Prepared metal roofs:: Suitable for felt bonding over compatible metal after rust and loose coatings have been removed.; Cold gritting:: Fixes mineral chippings to the final felt layer on suitable roofs with slopes up to 10°.How to Use: Ensure the roof surface is stable and remove dirt, dust, grease, rust and loose material.; Deal with green growth before starting and repair damaged areas where necessary.; Prime porous concrete and cement surfaces with Sika Black Jack 902 Bitumen & Flashing Primer and allow it to dry completely.; Stir the adhesive thoroughly before use and continue stirring periodically during application.; Apply evenly by brush or mop.; Leave the adhesive open for around 15–30 minutes to develop its full tack.; Unroll the felt carefully into the adhesive and press or roll each section firmly into place.; Work out trapped air as the felt is laid.; Weight the felt where practical until a secure bond has developed.; Check the roof after approximately 24 hours and re-roll any areas or laps that have not fully bonded.










